n4ktz 497,598 views 3:52 Ice maker or water dispenser not working - Refrigerator repair - Kenmore Whirlpool - Duration: 13:14. On models with multiple solenoid inlet valves, you will need to determine which portion or portions of the valve are used for the ice maker. If the temperature is fine, the cause of your ice maker problem may be the heater. I remove the ice tray, unscrew the three screws that holds the motor cover in place and the motor is attached to this cover from the back side. http://swusf.org/ice-maker/ice-maker-in-freezer-is-not-working.html
Then you can try removing the sediment screen inside the solenoid and flushing it with water to clean it, and at the same time you can inspect any seals or diaphragms You may have to manually close the freezer door switch for this to operate. John Jones Same problem Need help Joe Massey Ice maker makes ice once.always have to push the wire bare down to make ice. Your model number is on a plate, in one of these locations: Side by Side Freezer on Top Handy tip -Make it easy on yourself! http://www.partselect.com/Repair/Refrigerator/Not-Making-Ice/
With this type of problem, you can have it repaired, but it’s often wiser, easier, and less expensive to replace the unit entirely. With proper care and maintenance, most ice makers function with minimal hassle. Working... Water Inlet Valve - Frigidaire Refrigerator This video provides step-by-step repair instructions for replacing the water inlet valve on a Frigidaire refrigerator.
Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).When cubes are too big or smallCause: If the ice crescents are too big or there is In addition, check to see if frost has accumulated on the evaporator coils. Josh You ever get an answer to this? Commercial Ice Machine Not Making Ice Ensure that the ice level control board is getting power.
Thanks for the encouragement! Kitchenaid Ice Maker Not Making Ice If none of these parts are at fault, and the freezer temperature is at least 15 degrees Fahrenheit, replace the ice maker assembly. RepairClinic.com 164,318 views 2:26 How Does The Ice Maker On A Refrigerator Work? — Appliance Repair & Troubleshooting Tips - Duration: 3:32.
You have Successfully Subscribed!
Check or test each item, starting with the items at the top of the page. Ice Maker Not Getting Water Sign in Share More Report Need to report the video? Parts Icemaker Module Please enter your model number so we can show you the part that fits your exact model Where is my model number? Hasn't been right from day one .
You will need to shut off the valve from the household water supply before you disconnect the inlet tubing. directory Your model number is on a plate, in one of these locations: Side by Side Freezer on Top Handy tip -Make it easy on yourself! Kenmore Ice Maker Not Making Ice Check the water flow and test the pressure to determine if it is at least 20 psi. Ice Maker Not Making Ice Frigidaire Top 6 Reasons Refrigerator Ice Maker Isn’t Working?
SUBSCRIBE! New Installation Make sure the refrigerator and ice maker are plugged in and your ice maker is turned on before looking for other problems. Sign in to report inappropriate content. http://swusf.org/ice-maker/ice-maker-freezer-not-working-kenmore.html If the thermostat contacts are open, the ice maker will not make ice.
no joy. Frigidaire Ice Maker Not Working But Water Does If the mold thermostat does not have continuity, replace it. (Note: If the ice maker is not cold enough, the mold thermostat contacts will open. Top 6 Reasons Refrigerator Runs Constantly?
Low household water pressure or a restriction at the manual shut off valve will also cause the water inlet valve to not shut off completely and create this same condition. Good Appliance Wabash, Indiana Category Howto & Style License Standard YouTube License Created using YouTube Video Editor Source videos View attributions Show more Show less Loading... Rating is available when the video has been rented. Ice Maker Not Making Enough Ice To fix this problem, turn a hair dryer on at its lowest heat setting and warm the inlet tube.
Could something have happened like water in line freezing when plugged back in? hightideblue 1,163,384 views 8:13 Top 6 Reasons Refrigerator Ice Maker Isn’t Working? — Refrigerator Troubleshooting - Duration: 3:46. ApplianceVideo.com 144,739 views 7:01 Frigidaire & Elextrolux Refrigerator - Ice maker not making Ice - No water to unit - Duration: 12:59. weblink I thought maybe during the draining and flushing of my water heater that the maker inlet valve got air locked.
AdamDIY 242,608 views 13:14 How To Troubleshoot A Whirlpool Modular Ice Maker With Optical Controls - Duration: 3:33. You have Successfully Subscribed! If none of these parts are at fault, and the freezer temperature is at least 15 degrees Fahrenheit, replace the ice maker assembly. This is a live voltage test and should only be performed by a qualified person.
In some cases, it may be easier to remove the ice maker than to thaw out the fill tube with the ice maker in place. The heater and defrost thermostat are ok. disqus_grAsbRT3Zm Having same problem with my icemaker. Photo Credits Ryan McVay/Photodisc/Getty Images Suggest a Correction How to Repair an Ice Cube Maker That Is Not Getting Water Why Does the Ice Maker in the Refrigerator Not Work?
If the refrigerator is operating at the proper temperature, the icemaker or water valve could be defective. $88.54 Quantity: In Stock › Suggested tools Multi Screwdriver RepairClinic Item #3527472 $14.95 Same If necessary, replace the inlet valve and the tap valve. Cause 6 Door Switch The door switch turns off the ice and water dispenser when the refrigerator door is open. The ice dispenser is making ice but for some reason, water is getting in the bin and freezing everything into a big blob.
it fills up the ice tray, freezes the ice cubes but does not eject them. Thanks Jim my ice cube maker very frequently makes loud noise, what should I do to stop this? If none of these parts are at fault, and the freezer temperature is at least 15 degrees Fahrenheit, replace the ice maker assembly. Sign in to add this to Watch Later Add to Loading playlists...
Fix: To adjust how much water the ice mold is filled with each cycle, first remove the cover from the ice maker. This means the valve and the solenoid are probably okay, but the water supply is not. The water inlet valve requires a minimum of 20 psi to function properly. Yes No Thanks!
MORE ABOUT THIS REPAIR - Customers rate this repair as Easy - 30 - 60 minutes We have 84 installation instructions We have 2 step-by-step videos Inspect the ice maker mold