HP Customer Support Support Home Products Software and Drivers Forums Contact Support Search Select your Model Let HP find my products Identify now HP can identify most HP products and recommend Only few lucky guys got it resolved. If BIOS does not open using F10, repeat the process using the F1 key instead. note: Disc recording software programs that come with HP and Compaq computers are made to recognize only the original CD/DVD drives that come with the computer. Check This Out
For instance, all your efforts will go to waste if you don’t have the required driver disc and are not able to locate the required driver on the Internet. Reply Robert Brunelle October 17, 2016 at 8:52 am I wish if I may could, but this is all I know as of now. Step 3: Use the Hardware and Devices troubleshooter If a window does not open when discs are inserted into the drive and the drive does not appear in File Explorer, it If the drive is not recognized, continue to replace the PxHelp20 registry value. read the full info here
Reply to coastie65 monkakkaDec 13, 2013, 4:45 PM coastie65 said: Ok. Make sure the disc type is compatible with both the computer burning the disc and the computer playing the disc (CD-R, DVD+R, etc...) See the document Disc Format and Compatibility Information. The drive should work correctly once it has been enabled.
Reply Giovanni May 21, 2016 at 6:49 pm same problem here, i cant start windows now Reply Robert Brunelle May 23, 2016 at 2:59 pm I wish if I could help Double-click DVD/CD-ROM drives to expand the category. Use these steps to troubleshoot this condition. Hp Dvd Driver For Windows 7 Free Download A copy of the registry has been saved for back-up purposes to the Documents folder.
Drivers, speed, everything. Hp Dvd Driver Download HP Customer Support Support Home Products Software and Drivers Forums Contact Support Search Select your Model Let HP find my products Identify now HP can identify most HP products and recommend To download, select the Model Name/Number of your device, then click the Download button. Confirm the deletion by clicking Yes.
If any discs fail to open, set the failed discs aside. Hp Cd Rom Driver Download Figure : Removing the side panel Gently disconnect both the data cable and the power cable from the back of the CD/DVD drive. Remove the side panel. Installing software that can burn discs, some music software, and some DVD authoring/decryption software can cause these types of problems.
If Windows does not recognize the drive, repeat Step 2 to see if the drive name appears in Device Manager and troubleshoot disc burning software if needed. Hewlett Packard (HP) Driver Downloads by Device Printer Network / Ethernet BIOS / Motherboard Video / Graphics Scanner Hard Disk Drive Other Mouse / Keyboard Sound / Audio CD / DVD Dvd Drive Not Detected In Windows 7 If you have added a new drive, use the disc burning software that came with the drive or use the native burning capabilities of Windows. Hp Laptop Dvd Drive Not Reading Discs If one wil read and the other not, then you need to replace the drive.
Worked perfectly. http://swusf.org/dvd-drive/hp-laptop-dvd-drive-not-working-windows-vista.html If you are using a desktop computer with BIOS version 6 or less running Windows 7 Turn off the computer and wait five seconds. Cd/dvd drive not reading disc cd/dvd drive not reading disc solved CD/DVD ROM DRIVE chooses disc to read... First un-install, reboot and then re-install. Hp Dvd Drivers Windows 10
Then see if it will read either CD or DVD. Select CyberLink Power2Go, then click Next. After the computer has restarted, install CyberLink Power2Go from the HP Application Recovery program: Click Start , click All Programs, click Recovery Manager, and then click Recovery Manager again. this contact form Make sure you have selected this exact key name.
There was a program which was downloaded at the same (which I opted not to download but it did anyway) and it started scanning for errors and cleaned the registry at Dvd Drive Not Detected In Windows 10 Step 4: Checking drive cable connections of computers running Windows 7 (desktop tower computers only) If you are using a desktop computer, perform the steps in this section to check the Thank you...15th September 2014 1:13amKateWhat am I going to do?
Press the eject button to retrieve the disc and unlock the computer. If not, select it. Turn on the computer and immediately press the F10 key repeatedly until the BIOS Setup Utility screen appears. Dvd Drive Not Recognized Windows 8 Without the DVD drive can I copy the vista installation dvd into a external hard drive?
If that computer cannot play it, something is wrong with the disc or the other computer's burn capabilities. Use the arrow keys to select Device Configuration, and then press Enter. Then complete the following steps. http://swusf.org/dvd-drive/hp-laptop-cd-drive-not-working-windows-7.html Type the drive letter for the drive that contains the disc followed by a colon (:).
If the drive is not recognized, continue to the next step. caution: This product contains components that can be damaged by electrostatic discharge (ESD). The disc drive should now be recognized by your recording software. He wanted $99.
Turn on the computer and immediately press the F10 key repeatedly until the BIOS Setup Utility screen appears. When done, use the CD or DVD drive again to see if it can read discs. Click the arrow next to each of the following items in the list: HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control Class Select 4D36E965-E325-11CE-BFC1-08002BE10318. Right-click CyberLink Power2Go, then click Uninstall.
External hard disks are unaffected. Make sure the disc burning session was closed after the disc was finished. Download it from here. Step 5: Clearing the upper and lower registry filters on computers running Windows 7 Clear the registry filters for Device Manager error codes 10, 19, 31, 32, 39 or 41 using
It is probably related to the software configuration in Windows. Find Solutions, ask questions, and share advice with other HP product owners. If it works, you are done. Surely the above didn't work… what else do I have to do??
Figure : Registry Editor Click File, click Export, type a filename that is easy for you to remember, then click Save.